Solutions · Strata

Complex Strata Solution

A compound mix design for saline, hot-humid and interbedded ground, keeping long-circulation slurry performance stable.

Solution overview

Application methods
非开挖管线施工 / 钻探与钻井施工
Problem type
Strata

Scenario and construction challenges

Alternating saline groundwater and hot-humid interbedded ground: polymers degrade and bentonite yield drops, so compound formulations are needed to hold performance.

Challenge 1Salt degradation

Saline groundwater degrades polymers and kills viscosity, collapsing slurry performance.

Challenge 2Heat loss

Evaporation and fluid loss accelerate in hot, humid conditions, making the hole level hard to keep.

Challenge 3Unstable indices

Interbedded ground swings slurry indices widely — continuous testing and tuning are required.


Complete solution

Each scheme pairs materials with dosing; the table below lists material, role and ratio per step.

StageMaterialFunctionRatio / dosageWorking conditionScope
Base slurryBENT-N sodium bentoniteSalt-tolerant base6%–8%Saline groundwater, Cl⁻ ≤5000 mg/LSalt-tolerant base slurry
Salt resistanceHDS-9 SeaShieldAnti-degradation0.5%–0.8%Salinity ≤35‰, temperature ≤60 °CSeawater or saline strata
RheologyCMC-NViscosify & control loss0.3%–0.5%Hot, humid conditions with rising fluid lossCirculation rheology stability
MaintainCompound top-upCondition by test resultsAs requiredSlurry indices fluctuatingAdjusted from shift test results
iWorking conditions and scope in the reference mix table are typical values; actual dosages must be confirmed by on-site trials with raw water, soil samples and project design, and do not constitute a performance commitment.

Delivered results

72h
Stable circulation time
1/5
Polymer degradation rate
100%
Shift test pass rate
✓The figures above are measured data from this project (indicative). Actual performance varies with strata and working conditions; a full case report is provided together with the delivered solution.

Construction schematic & site photos

Use the schematic and site photos to follow the process and slurry flow; final parameters follow on-site trial results.

Construction schematic

① Rig and circulation system ② Salt-resistant slurry make-up ③ In-hole circulation & cuttings lift ④ Return testing and top-up

Site photos

Pile area overview
On-site slurry testing
Wall inspection

Related cases

GET A QUOTE

Tell us your strata conditions —
get tailored selection advice

Share your strata, borehole diameter and schedule; engineers will reply with mix advice, quantity estimates and lead time. Your information is used only for this enquiry.

✓On-site strata compatibility assessment (per project arrangement)
✓Batch test report & certificate with every shipment
✓On-site mix commissioning by our engineers (per project arrangement)
✓Samples and product brochures on request
Sales hotline
Business email
Form mode
For a quick conversation, leave your name, phone and a short message. Choose detailed project requirements if you have strata, borehole diameter or schedule data.
Filled in from the entry point you used; you can change it
Additional strata (multiple choices)
We will contact you to discuss your requirements.