化学泥浆旋挖钻机施工规程
2018-10-7 10:09:13 点击：
| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ansi/astm f1271-1997 | 船上储罐液体过压保护装置溢流阀规范 | specification for spill valves for use in marine tank liquid overpressure protections applications |
| ansi/astm f1802-2004 | 溢流阀性能试验的试验方法 | test method for performance testing of excess flow valves |
| ansi/astm f2138-2001 | 天然气设备溢流阀规范 | specification for excess flow valves for natural gas service |
| astm d 5782-1995 | 地质环境勘探和地下水质量检测装置安装用直接气体旋转钻机的使用标准导则 | standard guide for use of direct air-rotary drilling for geoenvironmental exploration and the installation of subsurface water-quality monitoring devices |
| astm d 5783-1995 | 地质环境勘探和地下水质量检测装置安装用带水基钻流的直接旋转钻机的使用标准导则 | standard guide for use of direct rotary drilling with water-based drilling fluid for geoenvironmental exploration and the installation of subsurface water-quality monitoring devices |
| astm f 1271-1990 | 船上储罐液体过压保护装置用溢流阀 | standard specification for spill valves for use in marine tank liquid overpressure protections applications |
| astm f 1793-1997 | 空气或氮服务用自动截流阀(也称为溢流阀)的标准规范 | standard specification for automatic shut-off valves (also known as excess flow valves, efv) for air or nitrogen service |
| astm f 1802-2004 | 溢流阀性能测试标准试验方法 | standard test method for performance testing of excess flow valves |
| astm f 2138-2001 | 天然气设备用溢流阀标准规范 | standard specification for excess flow valves for natural gas service |
| bs 1090-1970 | 矿山用手持式电动钻机的防火规范 | specification for flameproof hand-held electric drilling machines primarily for use in mines |
| bs 5126-4-1993 | 电压可达1100v的系统用矿山型阻燃式电源和控制装置.第4部分:钻机供电装置的气冷变压器规范 | mining type flameproof supply and control units for use on systems up to 1100 v. specification for air-cooled transformers to power drilling machines |
| bs 787-4-1972 | 矿用式防爆电缆终端箱规范.第4部分:(650v以下三相交流电路用)钻机用电缆终端箱 | specification for mining type flameproof gate-end boxes - gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 v) |
| bs en 12348-2000 | 立式岩心钻机.安全性 | core drilling machines on a stand - safety |
| bs en 791-1996 | 钻机.安全性 | drill rigs - safety |
| bs en iso 8662-6-1995 | 便携式手提动力工具.手柄振动的测量.第6部分:冲击式钻机 | hand-held portable power tools - measurement of vibrations at the handle - impact drills |
| din 33891-4-1992 | 技术设备的粉尘排放.粉尘排放率的测定.手持钻机和手锤 | dust emission of technical equipment determination of dust emission rate handholding drills and hammers |
| din 73368-1986 | 燃料喷射装置的溢流阀和空心螺钉 | overflow valves and hollow screw for fuel injection devices |
| din en 12348-2000 | 立式岩芯钻机.安全性 | core drilling machines on stand - safety german version en 12348:2000 |
- 上一篇：化学泥浆履带式打桩机行走时的注意事项 2018/10/7
- 下一篇：奈普顿聚合物泥浆网站新版进入调试阶段【公司新闻】 2012/5/23
